November 1, 2016

How to make Kameez with Shoulder Princess line?

A princess line dress is a fitted garment that has seam lines crossing over the bust point, replacing darts. As these princess lines absorb fullness of dart within stitch lines  and control the fit of garment, they are also called dart equivalents.

* The pictures and instructions are offered here for free. Please don't repost any of my content without permission. Thanks!

In this post, I have shown step-wise pattern making of Kameez with Shoulder Princess line in Front & Back. It is a step-wise method where I have used Basic bodice (of Front & Back) and Basic Skirt Sloper (Front & Back) made using personal body measurements.

STEP-1: Tracing the Basic Blocks
  • For making Shoulder Princess line Kameez, trace Front Bodice with shoulder dart & waist dart. Below this bodice, trace Front of basic skirt
  • Similarly, trace Back Bodice with waist dart & below that bodice, trace Back of basic skirt. (refer below image showing STEP-1).
  • Length of the Basic Skirt Sloper is from waist to knee. You can extend the length below knee for Kameez as desired after tracing the drafts.
STEP-2: Shaping Neckline & Armhole, Adding flare & Princess line
  • Neckline Shaping-
- To shape the neckline as per required pattern, go inward from neck-shoulder point by 1.5 cms.
- From that point, mark the neck depth point (using a scale) on Centre Front.
(*follow the red color lines shown in STEP-2 in below image)
- Join these two points based on required neck shape.
  • Armhole Deepening-
- Deepen the armhole by 1.5 cms from armhole-side seam point in both Front & Back bodice.
- Draw a new arm curve running parallel to original arm curve and merge as shown in STEP-2 in below image. You can merge the new arm curve in the 1/3rd armhole marking (refer image).
  • Adding flare to Hemline-
- For flare, move outwards from hemline by 5 to 15 cms. depending on how much flare is required.
- Using a scale, move up towards hip line, join this flare point to hip curve (i.e. merge slant line of flare into hip curve).
- At the hem and side seam corner, move up on slant line by 2cms (see STEP-2 in image) and give a slight curve shaping to hem.
- * Shape the side seam contours at the waist to hip region with a slight smooth curve.
  • Marking Shoulder Princess line-  
(*follow purple color lines shown in below image)
(Front Bodice)
- Mark the shoulder dart and waist dart in  purple color lines.
- From bottom of the waist dart, draw a straight line moving down towards the hemline.
(Back Bodice)
- Mark  midpoint of shoulder. Join this midpoint to top of waist dart with  purple color lines.
- From bottom of the waist dart, draw a straight line moving down towards the hemline.
How to make Kameez with Shoulder Princess line?
STEP-3: Cutting the Princess line Panels
  • Cut along the purple color lines shown in above STEP-2 image to separate the Centre Panels from Side Panels.
  • You have to cut the pattern along the shaped neckline, deepened armhole, added flare, shaped side seams and the marked shoulder princess lines.
How to make Kameez with Shoulder Princess line?

LEG-O-MUTTON SLEEVE PATTERN:
  • I have combined a Leg-O-Mutton sleeve pattern with this Shoulder Princess line Kameez.
  • Leg-O-Mutton sleeve have fullness added in the form of gathers only at the sleeve capline (i.e. top curve of basic sleeve). This sleeve is fit at sleeve hemline. Leg-O-Mutton sleeve can be of any length & it's fullness can be more or less as desired.
Some Tips:-
  1. *When making Basic Sleeve pattern always measure the deepened arm curve of Front & Back bodice accurately with a measure tape.
  2. *In order to ensure perfect fit of a sleeve, always make the sleeve draft after you have finished making the Front & Back patterns of your garment.
How to make Kameez with Shoulder Princess line & Leg-O-Mutton Sleeve?
STEP-1: Mark slit line:-
- Use pattern of Basic Sleeve with your desired length for making Leg-O-Mutton sleeve. I have used Sleeve length as 18 cms.
- Mark slit line at centre of sleeve running straight from sleeve cap to hem. (refer image)

STEP-2: 
  • Add fullness for gathers:-
- Cut along the marked slit line to separate front & back of sleeve.
- On a separate paper, draw an approx. perpendicular. (*follow fine black lines shown in image)
- When placing the front & back sleeve on either side of perpendicular, keep the sleeve cap at an equal distance of 3 to 6 cms (i.e. "x" fullness as required) and sleeve hem tip joining each other. (refer image)
  • Shape the sleeve capline & hemline:-
- Join sleeve cap in centre with fine black line as shown in image. From this line, go up by 1.5 cms to mark new sleeve capline.
- To mark new sleeve capline, mark midpoints (i.e. 1/2) of front & back sleeve blocks (refer image). -- Then draw a new curve (follow beige colour curve shown in image) from 1/2 front sleeve cap-passing over 1.5 cms-to 1/2 back sleeve cap.
- To shape new sleeve hemline, draw horizontal line joining two end of sleeve hem with fine black line as shown in image.
- Mark midpoints of horizontal line & draw perpendicular of 0.5 cm to mark curves (follow beige colour curve shown in image).

STEP-3: 
- Trace STEP-2 showing beige colour curve at sleeve capline & hemline and sleeve side seam.
- Leg-O-Mutton sleeve pattern is ready with added fullness at it's capline marked in green lines.

I hope this post was helpful to you.
Please leave your valuable comments / queries and I will be happy to reply. :) :)

If you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook. Thank you!

Stay connected on 
Facebook / Pinterest / Twitter / 

3 comments:

  1. You marked a midpoint on the shoulder for princess line kameez. But, later cut on the purple lines(in front bodice) tht s the shoulder dart lines. Please explain

    ReplyDelete
    Replies
    1. Hi,

      In Front Bodice
      - Mark the shoulder dart and waist dart in purple color lines.
      - Cut along the purple color lines to separate the Centre Panels from Side Panels.

      In Back Bodice
      - Mark midpoint of shoulder. Join this midpoint to top of waist dart with purple color lines.
      - Cut along the purple color lines to separate the Centre Panels from Side Panels.

      Hope this helps.

      Let me know if you still have any queries.

      Happy sewing!
      Shraddha

      Delete
  2. So nice very good 👍 I like is good job for us thanks

    ReplyDelete

I love hearing from readers of my blog so please feel free to leave a comment and let me know what you thought about this post/tutorial. Any tips / hints to improve my articles are always much appreciated too!

Contact Form

Name

Email *

Message *