Baby frock/dress with yoke - F R E E Pattern

Hello everyone,

I hope you all are safe.

Thank you very much for subscribing by signing the Free Newsletter of this blog.

I am back with one more simple pattern of a Baby frock with a yoke.

Fyi (in case you are new to the little blog of mine☺), in my previous few posts, I have explained pattern making of some very common saree blouse patterns like Simple Sleeveless Blouse, Basic Saree Blouse with Sleeve, Double Katori Blouse, One Piece Katori Blouse and also a simple stylized Sun-rays Neckline Saree Blouse, Saree Blouse with Back Smocking, High Neck Saree Blouse, Stand "V" Saree Blouse, Raglan Sleeve Saree Blouse, Blouse with Basque (Patti), Boat Neck Saree Blouse, Scallop Shaped Neckline and OFF Shoulder Raglan sleeve saree blouse with Armhole Princess line.

You can also visit my new YouTube Channel - "Sudha's Apparel Patterns" for more sewing videos. Please Subscribe to the Channel if you like it. ☺

So let's start with step-wise pattern making of a Baby frock with a yoke.

The Baby frock/dress pattern has (1) Straight yoke in front and back, (2) gathers below yoke in front and back (3) puffed sleeves. This frock will have a center back opening.

* The pictures and instructions are offered here for free. Please don't repost any of my content without permission. Thanks!

To make a Baby frock with a yoke and puffed sleeves, all measurements must be taken with great care for precise results. Please note below given measurements are not standard measurements so use them just as an example. Your measurements may differ depending upon your baby's body type.

Measurements required:- (in centimeters)
1. Length of the frock - 35 cms (or length as desired).

2. Shoulder - 10 cms.
3. Sleeve Length - 10 cms.
4. Round Arm - 16 cms.
5. Round Chest - 50 cms.

6. Sleeve Hem Strip width - 2 cms.

* Answers for each step of formula calculation is given in brackets.

Steps of drafting:- 

Front - (Yoke)
0-1 = 1/5 Round Chest + 1 cm (11 cms)
1-2 = 1.5 cms
* Yoke length is 0-2 = 11 + 1.5 = 12.5 cms

1-3 = 1/4 Round Chest + 4 cms  (12.5 + 4 = 16.5 cms)

0-4 = Shoulder + 0.5 cm (10 + 0.5 = 10.5 cms)

4-5 & 2-5 = Join points as shown in image
5-6 = up by 1.5 cms
Join 2-6 with a slight curve line as shown for yoke hem

4-7 = down by 1.5 cms

0-8 = 1/10 Round Chest - 1 cm (5 - 1 = 4 cms)
0-9 = 1/10 Round Chest (5 cms)
Join 9-8 for front neck curve

Join 7-8 for shoulder and 

Join 6-7 for front arm curve as shown in image.

To draw front arm curve, mark mid-point of 6-7 and draw a line of 1 cm as shown. 

Then draw the front arm curve passing over the 1 cm as shown.
Front Yoke is marked in RED ink in above pattern

Back - (Yoke)

0-10 = 2 cms

6-11 = 1.5 cms
Join 2-11 with a slight curve line as shown for yoke hem

Join 8-10 for back neck curve

Join 7-11 for back arm curve as shown in image

Back Yoke is marked in BLUE ink in above pattern

Front Bottom Gathers -

3-12 = down by 1.5 cms

12-13 = Round Chest x 3 / 4 (50 x 3 = 150 / 4 = 37.5 cms) can be approx. 40 cms

13-14 = Full length - Yoke length + 1 cm (35 - 12.5 + 1 = 23.5 cms)

14-15 = down by 4 cms for dress hemline

Join 15-16 and 12-16 as shown

16-17 = up by 4 cms for dress hemline 

14-17 = make dotted line for hemline fabric fold

12-18 = down by 1.5 cms

18-19 and 5-19 = Join as shown

5-18 = Join for remaining front arm curve marked in RED ink

  

Back Bottom Gathers -

5-20 = 1.5 cms

20-18 = Join for remaining back arm curve marked in BLUE ink

Puffed Sleeve -

Make the sleeve pattern on folded paper.
0-1 = down by 2 cms
1-2 = Sleeve length + 1 cm (10 - 1 = 9 cms)
0-3 and 2-4 = 10 cms
Join 3-4 in straight line as shown
3-5 and 4-6 = 1/4 Round Chest (12.5 cms)
5-6 = Join points as shown

5-7 = down by 2 cms

1-7 = Draw straight line

7-8 = 1/10 Round Chest + 1.5 cms (5 + 1.5 = 6.5 cms)

6-9 = up by 1.5 cms

Join 9-4 in a slight curve as shown

9-10 = mark 1 cm

Join 8-10 for sleeve side seam

8-11 = 1/2 of 3-8

3-12 = 1/4 of 3-8

11-13 = 1.5 cms (draw perpendicular to 3-8 as shown)

12-14 = 1.5 cms (draw perpendicular to 3-8 as shown)

8-15 = mark 1.5 cms

Join 3-12-13-8 for front sleeve arm curve marked in RED ink in above pattern

Join 3-14-15-8 for back sleeve arm curve marked in BLUE ink in above pattern

Sleeve hem piping:-

0-1 = sleeve hem strip width + 1 cm (2 + 1 = 3 cms)

1-2 & 0-3 = 1/2 Round Arm + 2 cms (8 + 2 = 10 cms)

Join 2-3

The fabric used:- For making the baby frock, you can use thin printed Poplin, 2 x 2, Khadi, Cambric, Organdy, Taffeta, Satin, Voile, etc. However, if you are a beginner, prefer using Cotton Voile fabric. You can also use different fabrics (i.e. plain, printed, embroidered, etc.) to get variations.

Some Tips:- when preparing the fabric for draft placement & cutting:--

1) If using the basic woven cotton material, then straighten the fabric by slightly stretching it diagonally to align the warp & weft at a right angle.

2) Iron the fabric always to make it crease free prior to marking/placing the draft over it.

3) If you are a beginner, prefer making the draft on paper and then pin it to the fabric.

I hope you liked this post of a simple baby frock pattern.

If you liked it then Pin it!☺

If you enjoyed this post, please spread by emailing it to a friend, or sharing it on Pinterest, Twitter, or Facebook. Thank you!

Stay connected on 

Facebook / Pinterest / Twitter / YouTube / Instagram

I love hearing from readers of my blog so please feel free to leave a comment and let me know what you thought about this or any other post/tutorial given in the blog. Any tips/hints to improve my articles are always much appreciated too!☺☺

Happy Sewing!

DIY Tiered dress tutorial - FREE Pattern

Well it's here. The Tiered Dress Tutorial. I have made this dress for a 3 year old and used a combination of embroidered and plain Georgette fabric for making it. You may use striped, checkered, plain fabrics or their combinations to make this tiered dress.

DIY Tiered dress tutorial

Depending on the fabric you choose to make this dress, it will decide it's occasion to wear. For example; for summer wear, you can use bright pastel shades of any striped, checkered, plain cotton fabrics. Whereas if you wish to make this tiered dress for any special occasion like birthday party or wedding, then prefer using silk, satin or may be any thin brocade fabric on which gathers can be formed.

* The pictures and instructions are offered here for free. Please don't repost any of my content without permission. Thanks!

Step - 1
Make child's basic bodice. Below given bodice pattern can be used for child of 2 to 3 years of age. 

DIY Tiered dress tutorial

Step - 2

Cut 2 pieces each of the Front & Back bodice with CF & CB on fold (as shown in below image).

Cut 3 tiers / rectangles (for each bodice) on folded fabric with straight grainline (refer below image).

Tier-1: 6" x 21"

Tier-2: 7" x 32"

Tier-3: 6" x 44"

These 3 tiers will be stitched below each basic bodice (Front & Back) so you have to cut 2 pieces of each Tier (one for back and other for front).

DIY Tiered dress tutorial

Step - 3
Do gather stitch with maximum stitch length on top of each tier using sewing machine.
Then pull any one thread of the gather stitch for form gathers. (refer below image)

DIY Tiered dress tutorial

Below given image shows each tiers of below Front & Back bodice with gathers formed.

DIY Tiered dress tutorial

Step - 4

Mark boat neck on Front & Back neckline as shown below. 

Also mark slit line of 5 cms on centre back.

DIY Tiered dress tutorial

DIY Tiered dress tutorial

Step - 5

Stitch Front & Back Yokes to their linings at 1 cm on inner side at neckline & both arm curves 

(refer below image).

DIY Tiered dress tutorial

 When stitching Back neckline, stitch the neckline centre slit in V-shape (refer below image).

DIY Tiered dress tutorial

After stitching both arm curves & necklines of Front & Back, give slits on these curves at a distance of 2 cms. * Be careful that you don't slit the stitch line.

Step - 6

After slitting, turn both yokes to the right side, iron well & do edge machining on both arm curves & necklines of Front & Back Yokes. (as shown in below image)

DIY Tiered dress tutorial

DIY Tiered dress tutorial

 Step - 7

Once both Yokes are ready, then stitch 3 gathered tiers (each of Front & Back) one below the other at 1 cm. (refer below image)

DIY Tiered dress tutorial

DIY Tiered dress tutorial

Step - 8

Stitch Front tiers below Front yoke & Back tiers below Back yoke. Fold yoke hem 1 cm inside (of both main yoke piece & lining) and do edge machining. Hold the gathered tiered piece in between both hem folds.

Step - 9

Stitch both side seams and shoulders at 1 cm & 0.5 cm double sewn seam on inner side of dress.

DIY Tiered dress tutorial

Step - 10

Double fold round hem by 1 cm and do edge machining. When stitching hemline, keep both side seams facing back.

DIY Tiered dress tutorial

Step - 11

Embellish the Yoke if desired as per your choice.

DIY Tiered dress tutorial

Voila! Tiered dress is ready!!! Add your photos to the Facebook page so we can all enjoy them.

Did you like this tutorial? Wouldn’t it be nice to just say “thanks Shraddha for all your work on this”?

DIY Tiered dress tutorial

I love hearing from readers of my blog so please feel free to leave a comment letting me know what you thought about this post/make! Any hints or tips to improve my sewing are always much appreciated too!☺

DIY Tiered dress tutorial

If you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook.

DIY Tiered dress tutorial

Thank you & Happy Sewing!

Stay connected on 
Facebook / Pinterest / Twitter / 
Google+ / YouTube / Instagram

*********************

DIY Summer Maxi dress - How to Reuse/ Recycle Old Clothes - FREE Pattern

We all have those tops / kurtis with beautiful prints and designs which we are unable to wear. This can happen either because they don't fit you anymore ☺ or sometimes we wear them so many times but they still look new. Usually women find it difficult to discard such tops and tend to pile them in their cupboards. I do that sometimes. ☺ I had a very pretty cotton printed kurti which doesn't fit me anymore but I didn't want to discard. This made me think of making a cute summer maxi dress for my daughter. 

So I have come up with this dress pattern which is very simple to make and I can assure that by making one you can recycle your old yet beautiful cotton kurtis and make them wearable again.

* The pictures and instructions are offered here for free. Please don't repost any of my content without permission. Thanks!

I have designed this dress by making -

• Inverted Box Pleat in centre at waist of front & back
• Flared sleeve
• Waist band with border design

To begin with, I have first made a yoke pattern of the dress which is given below. This pattern is based on measurements of a 2 year old and I have used it for cutting both front & back yoke. 

Then I made the Flared sleeve pattern. For this I used below given basic sleeve draft which is again based on measurements of 2 year old.

Cut and open the above given sleeve draft and then used this as STEP - 1 for making below given Flared sleeve pattern. You have to slit the basic sleeve in centre (i.e. folded paper line) and open the sleeve at hem to add flare (see STEP - 2).

After making the yoke and flared sleeve draft of the Summer maxi dress, you can make inverted box pleat below waist in the dress. For making this pleat, below given is a simple diagram which explains calculation for making a Inverted Box Pleat -

To know the detailed & stepwise method of making this cute summer maxi dress from an old kurti, do watch my DIY video given below.☺

Did you like this tutorial? Wouldn’t it be nice to just say “thanks Shraddha for all your work on this”?

I love hearing from readers of my blog so please feel free to leave a comment letting me know what you thought about this post/make! Any hints or tips to improve my sewing are always much appreciated too!☺

If you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook.

Thank you & Happy Sewing!

Stay connected on 
Facebook / Pinterest / Twitter / 
Google+ / YouTube / Instagram

*********************

Flutter sleeve Romper - sewing tutorial & FREE pattern (PART-2)

Hello everyone,
This post is a continuation of my previous post (i.e. PART-1) where I have explained how to make a paper pattern  and cutting of Girl's Romper with Flutter Sleeve for a 2 year old.

Flutter sleeve Romper pattern for summer

In this post (i.e. PART-2), I have shown how to stitch the Girl's Romper.

* The pictures and instructions are offered here for free. Please don't repost any of my content without permission. Thanks!

Start by making the Flutter sleeves.

Stitching of Romper Flutter Sleeve & Top:-

Flutter sleeve Romper pattern for summer

• Keep 2 pieces of sleeve right side facing each other and stitch outer curve at 1 cm. Then trim the seam at 0.5 cm and give slits on curve at a distance of 2 cms. (* when giving slits on curve don't cut on the stitch line).

Flutter sleeve Romper pattern for summer

• Then turn the sleeves inside out and iron on the stitched curve. To hold the stitch curve, you can do an edge machining or any design stitch on outer curve of sleeves.
• Do gather stitching on inner side of sleeve curves as shown and pull the stitches gradually to form gathers.

Flutter sleeve Romper pattern for summer

• Attach button stand bands on both sides of Centre back as shown in above image.
• Cut these button stands on straight grain of fabric.
• Later, on Left side we will stitch the buttons & on right side we will make the button holes.

Flutter sleeve Romper pattern for summer

• Place Front, Back and both Flutter sleeves flat open as shown above.
• Stitch one side of sleeve to back arm curve and other side to front arm curve at 1 cm.
• These stitch lines will be on inner side / wrong side of garment.

Flutter sleeve Romper pattern for summer

• Once the sleeves are attached to Front & back, finish the arm curves by stitching bais band (3 cm width) at 1 cm over the stitched sleeves as shown above.

 

Flutter sleeve Romper pattern for summer

• In above image I have shown a more magnified view of bais band attachment in 2 STEPS.
• STEP-1 - shows bais band attached at 1 cm over the sleeve & arm curve.
• STEP-2 - shows folding other open edge of bais band 1 cm in to do design stitch from one end to other of arm curve.
• Finish all 4 arm curves in same way.

Flutter sleeve Romper pattern for summer

• Once the arm curves are finished, stitch bais band (3 cms width) on neckline at 1 cm.
• Fold the band 1 cm in at starting and ending of button stands as shown.

Flutter sleeve Romper pattern for summer

• Once stitched at 1 cm, trim the seam to 0.5 cm & give slits at a distance of  2cms (slits will help in folding the band inside).
• For neck piping, keep 0.5 cm on outer & inner side of neck & fold remaining 0.5 cm inside, iron well and do hemming / slip stitch.

Flutter sleeve Romper pattern for summer

• Stitch both side seams of top at 1 cm. You can either do a plain seam or an overlock (optional).

Once the Romper Top with Flutter sleeves is ready, stitch the Romper Trouser.

Stitching of Romper Trouser:-

Flutter sleeve Romper pattern for summer

• For stitching the romper trouser, place right side of back pieces facing right side of front pieces.
• Stitch both inner legs at 1 cm and give notches on curve as shown.
• Stitch both side seams of trouser at 1 cm.
• Turn both legs inside out and iron the inner leg seam & side seam on right side.
• Once the inner legs & side seams are stitched, then stitch the crotch of trouser.

Flutter sleeve Romper pattern for summer

• Once the crotch is stitched, finish the hem by rolling fabric in by 3 cms and then fold in 1 cm keeping 2 cms ready to do edge machining / design stitch on inner side of trouser hem.

Flutter sleeve Romper pattern for summer

• Romper Trouser is ready to be attached to Top.

Flutter sleeve Romper pattern for summer

• Attach top round waist to trouser round waist & stitch around at 1 cm.
• When attaching the round waist, keep right side of Top facing right side of Trouser.
• *Side seams of Top & Trouser should face opposite directions on both sides. You can even flatten the side seams.

Flutter sleeve Romper pattern for summer

• To insert cord / elastic, cut a bais band by measuring the stitched round waist & add 2 cms to it. Keep the ready width of bais band 0.5 cm extra than elastic band width. (For example; if elastic width if 1/2" then add 0.5 cm to 1/2").
• Also add 1 cm on each side of bais band width for stitching.
• *When attaching the bais waist band on right side of romper with edge machining, keep the romper waist seam facing the Romper Top.
• Elastic length measurement will be Round waist - 6 cms.

Flutter sleeve Romper pattern for summer

Romper with Flutter sleeves is almost ready. Just stitch some buttons & button holes at back button stand. You can put hook and eye  at top to hold both ends of neck piping.

You can also embellish the front with some embroidery or buttons, though it's optional☺.

Flutter sleeve Romper pattern for summer

Voila! Finished Romper!!! Add your photos to the Facebook page so we can all enjoy them.

Did you like this tutorial? Wouldn’t it be nice to just say “thanks Shraddha for all your work on this”?

I love hearing from readers of my blog so please feel free to leave a comment letting me know what you thought about this post/make! Any hints or tips to improve my sewing are always much appreciated too!☺

If you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook.

Thank you & Happy Sewing!

Stay connected on 
Facebook / Pinterest / Twitter / 
Google+ / YouTube / Instagram

*********************